INNOVA Research Journal 2017, Vol 2, No. 3, pp. 27-41
Bibliografía
Barelli, l., bidini, g., buratti, c., & mariani, r. (2009). Diagnosis of internal combustion engine
through vibration and acoustic pressure non-intrusive measurements. Applied thermal
engineering, 29(8), 1707-1713.
Daquinta, g. (2008). Mantenimiento y reparación de la maquinaria agrícola. Editorial félix varela,
la habana, cuba.
Fernández, m. C., fernández, m. F., fuentes, r. D., & montiel, á. C. (2011). Calidad de la energía y
generación distribuida en cuba. Revista cubana de ingeniería, 1(3), 41-50.
Gardiner, d. P., allan, w. D., laviolette, m., & bardon, m. F. (2007, january). Cycle-by-cycle
exhaust temperature monitoring for detection of misfiring and combustion instability in
reciprocating engines. In asme 2007 internal combustion engine division fall technical
conference (pp. 573-578). American society of mechanical engineers.
Gerler, j., costin, m., fang, x., kowalczuk, z., kunwer, m., & monajemy, r. (1995). Model based
diagnosis for automotive engines-algorithm development and testing on a production
vehicle. Ieee transactions on control systems technology, 3(1), 61-69.
González, f. P., & fernández, j. M. D. (2011). Motores de combustión interna alternativos. Editorial
universitat politècnica de valència.
Labis, p. E., visande, r. G., pallugna, r. C., & caliao, n. D. (2011). The contribution of renewable
distributed generation in mitigating carbon dioxide emissions. Renewable and sustainable
energy reviews, 15(9), 4891-4896.
Li, w., liu, z., wang, z., xu, y., & wang, j. (2015). Experimental and theoretical analysis of effects
of n 2, o 2 and ar in excess air on combustion and nox emissions of a turbocharged ng
engine. Energy conversion and management, 97, 253-264.
San miguel, p. A. (2014). Electrotecnia. Ediciones paraninfo, sa.
Sen, cuba. (2006). Generación distribuida, una alternativa energética y económica. La
habana. Cuba.
Tamura, m., saito, h., murata, y., kokubu, k., & morimoto, s. (2011). Misfire detection on internal
combustion engines using exhaust gas temperature with low sampling rate. Applied
thermal engineering, 31(17), 4125-4131.
Yang, j., pu, l., wang, z., zhou, y., & yan, x. (2001). Fault detection in a diesel engine by analysing
the instantaneous angular speed. Mechanical systems and signal processing, 15(3), 549-
5
64.
Revista de la Universidad Internacional del Ecuador. URL: https://www.uide.edu.ec/
41